描述
Adjustable all in one street light
This solar street light has an all-in-one design.
Its battery box can be disassembled for easy maintenance at a later stage.
Its arm is 60mm in diameter, and the installation angle can be adjusted from 0-90°.
The light body made of high-quality aluminum die-casting has IP65 waterproof performance.
At the same time, anti-corrosion and dustproof.
Especially suitable for highway, street, square, open-air court ……
▶Adopt monocrystalline silicon solar panel. It has a photoelectric conversion efficiency of up to 20% in the same size.
It can provide more power to the battery.
▶Adopt the LFP 32650 battery. Selects brand new cells with an A grade.
Matching different capacity cells according to different specification sizes. Can last for 3-4 rainy days.
▶Adopt a more energy-saving control system. Light control + induction + remote control, 3 different control methods.
The battery can be fully charged in 6-8 hours of sunlight.
Output different power according to different modes, thus extending the working time. (Working time > 12 hours)
▶Adopt an aluminum die-casting lamp arm.
Diameter 60mm, adjustable angle 90 °, load-bearing performance increased by 20%.
▶Adopt an aluminum die-casting lamp arm.
Diameter 60mm, adjustable angle 90 °, load-bearing performance increased by 20%.
Upgrade Pro (CD074Pro)
This is an upgraded version of CD074.
Using a larger lamp body, the models are 300W/400W/500W respectively.
Adopt a boost control system, higher power, longer working time, and larger irradiation area.
The same is the use of aluminum die-casting shell + PC optical lens.
It has IP65 waterproof, dustproof, anti-corrosion, and lightning protection performance.
The use of polycrystalline silicon solar cells and an 18V high voltage arrangement is conducive to the faster charging of the battery. The charging efficiency is increased by 30%.
Removable battery compartment for easy after-sales maintenance and accessories.
Also has an adjustable light arm. Adjustment scheduling is 0-90°.
The diameter of the sleeve can be selected: ∅ 60mm/∅ 76mm.
▶High-quality new LiFePO4 batteries are used and the 11.1V high voltage output setting is used.
Not only can it provide enough power for LEDs but working time is also longer.
▶Adopt only boost buck controller, and intelligent control of power output, so as to improve the lighting brightness of the lamp and extend the working time.
▶Microwave sensing is used（PIR）
Automatically output 100% power when the object passes by, and 20% power when the object leaves.
An intelligent and sensitive induction head can save more power consumption for both lamps.
